Description

This high quality solvent based sealer was designed to seal, protect and enhance the colour of natural terracotta when being fitted, leaving a tough durable easy clean rich gloss finish.

 

Properties

It contains high quality acrylics in a solvent base whish leaves an extremely hard wearing, durable finish that will actually increase the slip resistance of the surface leaving it impervious to acid, alkali, oil, grease, soap and water making it ideal for domestic or commercial applications.

 

Directions for use

After tiles have been fitted but before grouting they should be cleaned thoroughly using SMP Heavy Duty Residue Remover added to the wash water to remove any adhesive or cotta dust residues, following the instructions carefully. When totally dry apply sealer liberally until a uniform gloss finish is achieved. This sealer is touch dry in approx.12 hours but cures over the following 3-4 days during which time heavy traffic should be avoided to achieve the best results. We recommend that the customer apply 2-3 thin coats of SMP. Tough Coat Gloss to the floor after grouting to give a harder wearing easy to maintain surface.

 

Maintenance

To maintain the sealed surface only use SMP Sealed Floor Maintainer as the regular cleaning agent as this will prolong the life and appearance of the sealed surface. SMP Wash and Shine should be used when required to promote a rich gloss appearance after wear. Using these products will greatly prolong the need for time consuming restoration.

 

Restoration

We recommend that the sealed floor be stripped back when required using SMP Sealed Floor Stripper and then re-sealed as above to keep tiles in pristine condition.

 

Coverage

Approx 10sq.m per litre applying 2 coats

Technical information and C.O.S.H. See relevant notes at the back of this Product Guide.

** NB Always test this product on a small inconspicuous area first to ensure compatibility **